SEKI
Global supplier of PDLC FILM— News —
Maintenance and usage suggestions for dimming film products
调光膜产品的保养及使用建议
使用建议
通过以上智能液晶调光膜作业指导正确安装自贴调光膜，确保膜层与玻璃表面完整完全贴合，避免产生气泡以及杂质等存在膜与玻璃之间，长期容易导致膜层使用寿命下降，甚至影响膜层的正常工作，使用过程中避免应用在潮湿以及温度较高场所：建议应用场所（室内隔断，视窗后者其他投影幕墙等场所，空间湿度低，温差不大的应用场所）自贴膜电极保护，采用中性胶合理安装自贴膜。
保养及清洁
保养过程中避免使用玻璃清洁器剐蹭自贴膜表面，自贴膜的清理方式尽量用比较柔和的毛巾或者干燥布匹清理表面灰尘等杂质。让膜层表面进可能保持干净，或者用酒精/少量清水擦拭调光膜表面后再用眼镜布等棉质布匹将调光膜表面擦拭到干燥状态。
液晶调光膜优点
l 通电状态下的调光膜透光率行业领先水平，断电状态下的雾化状态隐私效果优越；
l 规格齐全，由于调光膜生产宽度受限：宽度一般为1.2、1.5、1.8m等，长度可以无限长（常规一般为50m）,并且可供选择性丰富（常规颜色：浅灰色、深灰色、乳白色，彩色：蓝色、黄色、粉红色、绿色等等）；
l 质量保障，交货期短，卷材交货期3~7天，片材4~9天；
l 电压要求低，可以通过控制器合理降低功耗；
l 粘附性好，长期使用不变形，不脱落，不起气泡；
液晶调光膜的包装及储存
包装：采用箱式/卷筒等包装方式，运输便利，片材一般采用木箱包装，每片之间采用纸张或者泡沫海绵隔开，有效保护每一片调光膜的完整性；卷筒能够大幅度降低包装空间，有效运输和验收；根据要求，会配有电极以及控制系统。
储存：液晶调光膜如果长时不使用，应当置于通风、干燥、空气湿度-15℃~50℃，相对湿度85%RH以下的环境中，原理阳光暴晒以及接触酸碱性气体和液体，不得淋湿以及浸泡。
Maintenance and cleaning
Advantages of LCD dimming film
Packaging and storage of LCD dimming film
Usage suggestions
Through the above intelligent LCD dimming film operation guide, correctly install the self-adhesive dimming film to ensure complete and complete adhesion between the film layer and the glass surface, avoid the generation of bubbles and impurities between the film and the glass, which can easily lead to a decrease in the service life of the film layer in the long term and even affect its normal operation. During use, avoid applying it in damp and high-temperature places: it is recommended to apply it in places such as indoor partitions, windows, and other projection curtain walls, where the space humidity is low and the temperature difference is not large. Use neutral glue to install the self-adhesive film reasonably for electrode protection.
Maintenance and cleaning
During the maintenance process, avoid using a glass cleaner to scratch the surface of the self-adhesive film. The cleaning method for the self-adhesive film should try to use a gentle towel or dry cloth to remove surface dust and other impurities. Keep the surface of the film layer clean, or wipe the surface of the dimming film with alcohol/a small amount of water and then use cotton cloth such as eyeglass cloth to wipe the surface of the dimming film to a dry state.
Advantages of LCD dimming film
The light transmittance of the dimming film in the powered on state is industry-leading, and the privacy effect of the atomization state in the powered off state is superior;
The specifications are complete, but due to the limited production width of the dimming film: the width is generally 1.2, 1.5, 1.8 meters, etc., the length can be infinitely long (usually 50 meters), and there are a variety of options available (regular colors: light gray, dark gray, milky white, colors: blue, yellow, pink, green, etc.);
Quality assurance, short delivery time, coil delivery time of 3-7 days, sheet delivery time of 4-9 days;
Low voltage requirements, power consumption can be reasonably reduced through the controller;
Good adhesion, long-term use without deformation, detachment, or bubble formation;
Packaging and storage of LCD dimming film
Packaging: box/reel and other packaging methods are used for convenient transportation. Generally, the sheets are packed in wooden boxes, and each sheet is separated by paper or foam sponge to effectively protect the integrity of each sheet of dimming film; The drum can significantly reduce packaging space, effectively transport and inspect; According to the requirements, electrodes and control systems will be provided.
Storage: If the LCD dimming film is not used for a long time, it should be placed in a ventilated, dry environment with an air humidity of -15 ℃~50 ℃ and a relative humidity of 85% RH or below. The principle is to expose it to sunlight and contact it with acidic and alkaline gases and liquids, and it should not be soaked or soaked.